SMA Male PCB Mount RF Coaxial Connector SMA Micro-Strip Bulkhead RF Connector

SMA Male PCB Mount RF Coaxial Connector SMA Micro-Strip Bulkhead RF Connector

Electrical Characteristics:

SMA is the abbreviation of Sub-Miniature-A. The full name of the antenna interface of SMA should be SMA inverse male. ). The wireless devices with this interface are the most popular. APs with more than 70[%], wireless routers, and wireless network cards with PCI interfaces of more than 90[%] all use this interface. This interface is moderate in size, and there are also handheld walkie-talkies and other devices. Many of them are of this type, but the needles and tubes inside are opposite to the wireless devices. Wireless APs and wireless routers using this interface include most of the civilian equipment. TP-LINK, DLINK, Netgear, Belkin and other brands, as long as the antenna is detachable, basically use this interface. The antenna interface of SMA should be SMA, and SMA and RP-SMA are different. There are many types of SMA. One difference in polarity is called "SMA" and the other is called "RP-SMA". The difference between them is: the standard SMA is: "external thread + hole", "internal thread + needle" ", RP-SMA is: "external thread + needle", "internal thread + hole".

SMA antenna interface
The full name of the antenna interface of SMA should be the SMA inverse male connector, which is the antenna connector. The equipment is the most popular. APs with more than 70[%], wireless routers, and wireless network cards with more than 90[%] PCI interfaces all use this interface. This interface is moderate in size, and many handheld walkie-talkies and other devices are of this type. , But the needle and tube inside are opposite to the wireless device.
SMA connector type
The new generation of meters are equipped with SMA connectors or corresponding SMA adapters.

The quality of SMA connectors is also different. From the perspective of the impact on signal quality, a good SMA connector provides a good standing wave ratio, which has low signal reflection and can effectively transmit signals.

There are many types of SMA connectors. From the connection of the interface, there are male and female (or male or female). In terms of connection, some can be directly inserted on the side of the PCB. If it is inconvenient to insert on the side, it can be inserted on the top of the PCB. The middle is the signal, and the surrounding four pins are ground.

There are also screws fixed, mainly used for the side wall connection of the radio frequency circuit with a shielding box. There are four screws and two.

Product Details:

Our Company:

1. RY Electronics has over 10 years of experience designing and manufacturing custom cable assemblies and antennas in large or small volumes depending on your needs.
 
2. Our manufacturing facilities can build just about many types of custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness) as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.

Why Choose Us?

1. We are professional antenna and accessories mamufacturer for 10 years.

2. Our sales manager will reply your inquiry in 24 working hours.

3. Customized design is available, OEM are welcomed.

4. Excellent after-sales service.

FAQ:

1. Manufacturer or trader?
We have been owning a factory since established,The factory keeps developing as our business grows larger.

2. What's your MOQ?
Normally our MOQ is 50pcs. Small order is also available.

3. What about the lead time for production?
3-5 working days for samples, 10-15 working days for bulk order.

4. How is your product quality?
Our raw materials are purchased from qualified suppliers. And we have a strong quality control team

5. What's the warranty?

One year, 12 months.

Payment:

Packaging & Shipping:

1. Usually we ship your order by sea or by air.

2. We do our best to ship your order within 1 week after receiving your payment
3. We'll tell you the tracking number once your order has been sent.

4. We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal.