Active 28DBI Omni Directional GPS GLONASS Antenna N Male Fiberglass

Product Details:
Place of Origin: China
Brand Name: RY
Certification: CE,ROHS,ISO
Model Number: RY-Active-521225-28
Payment & Shipping Terms:
Minimum Order Quantity: 50
Price: USD012~41.8
Packaging Details: sample carton 40*40*30cm ..etc
Delivery Time: Shipped in 15 days after payment
Payment Terms: L/C, T/T,Paypal, Western Union, MoneyGram
Supply Ability: 10000pcs
Contact Now

Detail Information

Frequency: 1575.42MHZ Gain: 28dbi
Connector: N Male Type: Fiberglass
Mounting Type: Pole Size: 53*15*12mm
High Light:

Omni Directional GPS GLONASS Antenna




28DBI gps active antenna

Product Description


FRP GPS Active 28DBI With N Male Fiberglass Omni-Directional Antenna For Outdoor​


SMC, or sheet molding compound, is made of unsaturated polyester resin, glass fiber roving, and other matching materials by special equipment SMC molding machine, then thickened, cut, put into metal die, and cured by high temperature and high pressure. SMC and its molded products, as a new type of glass fiber reinforced plastics, commonly known as FRP, can be divided into several processing methods: hand lay up molding, eruption molding, pultrusion molding, winding molding, resin transfer molding, molding and so on. SMC and its molded products have the following characteristics: light weight, high strength, accurate size, good batch quality consistency, and zero shortening rate. Compared with A-level appearance level, it has higher mechanization and automation, and is suitable for appearance quality

Three high

High precision, high efficiency, high gain

The most important operation of SMC in antenna production is to give full play to its characteristics in product planning and process manufacturing and meet the requirements of high precision antenna type. Under the condition that the data shortening rate and SMC molding shortening rate are stable, the shape of SMC antenna reflector deviates from the original planning paraboloid is small, that is, the precision of SMC molding antenna is completely guaranteed by the mold precision. The root mean square value of SMC antenna is 0.25 mm, that of single reflector is less than 0.3 mm, and that of assembled reflector is less than 0.6 mm.


Electrical Characteristics:

Key Specification
Center Frequency(MHz)
Circular Polarization
Working Temp
Storage Temp

What environment is FRP antenna suitable for ?


Because the vertical angle is small, the signal can only be transmitted at 6 ~ 8 degrees horizontally. Therefore, FRP antenna is widely used for wireless coverage in plain areas, in the same horizontal position environment, and in the same horizontal position environment. If it is mounted at a higher position, it can only transmit the signal to a farther position, but it can not cover the nearby or the place with height difference reach


Product Details

Active 28DBI Omni Directional GPS GLONASS Antenna N Male Fiberglass 0

Active 28DBI Omni Directional GPS GLONASS Antenna N Male Fiberglass 1

Active 28DBI Omni Directional GPS GLONASS Antenna N Male Fiberglass 2

Our Company
1. RY Electronics has over 10 years of experience designing and manufacturing custom cable assemblies and antennas in large or small volumes depending on your needs.

2. Our manufacturing facilities can build just about many types of custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness) as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.

Why us ?

1. Factory sell directly


2. 1 years quality warranty


3. Samples will be shipped in 2-4 working days


4. Exchange goods without reasons within 7 days


5. Support alibaba assurance order with your money safety and your order safety



1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.


3. How long can I expect to get the sample?
After you pay for the sample charge and we confirm the drawing with each other, the samples will be ready for 3-5 days. The samples will be sent to you via express and arrive in 3-5 days. You can use your own express account or prepay us if you do not have an account.

4. Can you do the design for us?
Yes. We have a professional engineer having rich experience in wire harness & cable assembly design. Just let us know your ideas and we will help to carry out your ideas into perfect products. It does not matter if you do not have someone to complete files. Tell us your detalied SPEC. of products, and we will send you finished drawing for confirmation.

5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 10 to15 days. Generally speaking, all of the goods can be reach your address within 4 weeks.

6. What is your terms of delivery?
We are accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or most cost-effective for you.












Get in touch with us

Enter Your Message

You Might Be Into These