White 4g Lte Modem Mifi Mobile Wifi Router Hotspot Folden Indoor Antenna

Product Details:
Place of Origin: China
Brand Name: RY
Certification: CE,ROHS
Model Number: RY-LTE-172
Payment & Shipping Terms:
Minimum Order Quantity: 20
Price: USD0.88~5.88
Delivery Time: Shipped in 3 days after payment
Payment Terms: L/C, T/T,Paypal, Western Union, MoneyGram
Supply Ability: 10000pcs
Contact Now

Detail Information

Color: White Mounting Type: Embedded,Screw,adhesive,magnetic
Application: Indoor/Outdoor Cable Type: No
Connector: SMA Type: Whip,puck,panel
High Light:

4g lte external antenna

,

4g lte aerial

Product Description

 

White 4g Lte Modem Mifi Mobile Wifi Router Hotspot Folden Indoor Antenna ​

 

 

Electrical Characteristics:

 

Antenna

Frequency Range

 

698 MHz to 2700 MHz

Polarization

 

Linear

Gain

 

5 dBi

V.S.W.R

 

< 1.5

Impedance

 

50Ω

Dimension

 

172 (mm)
Mechanical

Cable

 

No cable

Connector

 

FAKRA/SMA or others

Radome Material

 

ABS

Mounting Method

 

Screw
Environmental

Operating Temperature

 

Below 40℃ to 85℃

Relative Humidity

 

Up to 95%

Vibration

 

10 Hz to 55 Hz with 1.5 mm Amplitude 2 Hours

Environmentally Friendly

 

ROHS Compliant

 

Product Details:

White 4g Lte Modem Mifi Mobile Wifi Router Hotspot Folden Indoor Antenna 0

White 4g Lte Modem Mifi Mobile Wifi Router Hotspot Folden Indoor Antenna 1

Suggestions:


1. We supply different types of 4G antenna. They can be mounted with magnet, screw or adhesive. You can select the proper type according to antenna’s mounting position.
2. We can offer customization according to your individual requirements about antenna.
3. The omni-directional antenna for 4G cellular can not be covered by metal plate when working in case signals received are interfered.

 

Our Company:


1. RY Electronics has over 10 years of experience designing and manufacturing custom cable assemblies and antennas in large or small volumes depending on your needs.

2. Our manufacturing facilities can build just about many types of custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness) as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.

Our advantages:


1. Quality control:most of products have UL CE ROHS, certificate. ISO9001:2008.

2. Low MOQ:5pcs/10pcs/20pcs/50pcs,depends on different items.

3. Fast Delivery Time :2~15 days, On-Time Delivery.
 

4. We are available with Trade Assurance, you'll enjoy:
•100% product quality protection
•100% on-time shipment protection
•100% payment protection for your covered amount

 

Application:

 

1. The antenna radiates and receives radio waves. However, it is not radio waves that the transmitter sends to the antenna through the feeder. The receiving antenna can not send radio waves directly through the feeder to the receiver, which must go through the energy conversion process. Next, we take the radio communication equipment as an example to analyze the signal transmission process, and then explain the energy conversion function of the antenna.

 

2. At the transmitter end, the modulated high frequency oscillating current (energy) generated by the transmitter is fed into the transmitting antenna by the feeding device (the feeding device can transmit current wave or electromagnetic wave directly depending on the frequency and form). The transmitting antenna converts the high frequency current or guided wave (energy) into radio wave-free electromagnetic wave (energy) to the circumference. Circumferential radiation (see Figure 1); at the receiving end, radio waves (energy) are converted into high-frequency current or guided waves (energy) through the receiving antenna and transmitted to the receiver via the feeding device. From the above process, it can be seen that the antenna is not only a device for radiating and receiving radio waves, but also an energy converter and an interface device between circuit and space.

 

FAQ:


1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.

 

3. How long can I expect to get the sample?
After you pay for the sample charge and we confirm the drawing with each other, the samples will be ready for 3-5 days. The samples will be sent to you via express and arrive in 3-5 days. You can use your own express account or prepay us if you do not have an account.

4. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 10 to15 days. Generally speaking, all of the goods can be reach your address within 4 weeks.

5. What is your terms of delivery?
We are accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or most cost-effective for you.

 

Get in touch with us

Enter Your Message

You Might Be Into These